75 dimensions are in inches [millimeters]. all dimensions are subject to change. connector savers d - s ub positronic industries connectpositronic.com high density connector savers / gender changers dad series connectors are suitable for use in any appli- cations requiring high performance characteristic. the high density dad series is available in six standard connector variants of 15, 26, 44, 62, 78 and 104 contacts. dad series connectors utilize precision machined contacts for strength and durability. the female contact features a rugged open entry design. female posiband closed entry contacts can be chosen for even higher reliability, see page 1 for details. dad series connectors can be mated to a connector which would normally experience high numbers of mat- ing cycles. the dad connector can be easily replaced, ?aving a connector which is not easily replaced. connectors are available in standard density versions, see page 71. technical characteristics materials and finishes: insulator: polyester glass-filled per mil-m-24519, ul 94v-0. contacts: precision machined copper alloy. contact plating: gold flash over nickel plate. other finishes available upon request. shells: steel or brass with tin plate; zinc plate with chromate seal, stainless steel pas- sivated. other materials and finishes available upon request. non-magnetic versions are available, contact technical sales. mechanical characteristics: fixed contacts: size 22 contacts - male 0.030 inch [0.76 mm] mating diameter. female contact: open entry or posiband closed entry design, see page 1 for details. connector saver: male to female. contact retention: 9 lbs. [40 n]. shells: male shells may be dimpled for emi/esd ground paths. polarization: trapezoidally shaped shells. mechanical operations: 500 operations, minimum, per iec 60512-5 for open entry. 1000 operations, minimum, per iec 60512-5 for closed entry. electrical characteristics: contact current rating: 5 amperes, nominal for open entry. 10 amperes for closed entry. tested per u.l. 1977, six contacts energized. see temperature rise curve on page 2 for details. initial contact resistance: 0.010 ohms, maximum for open entry 0.005 ohms, maximum for closed entry proof voltage: 1,000 v r.m.s. insulator resistance: 5 g ohms. clearance and creepage distance: 0.042 inch [1.06 mm], minimum. working voltage: 300 v r.m.s. climatic characteristics: temperature range: -55?c to +125?c. dad series size 22 ?pen entry or posiband ?losed entry contact design connector saver p o s i t r o n i c i n d u s t r i e s ? p e r e u d i r e c t i v e 2 0 0 2 / 9 5 / e c ? rohs r o h s compliant for rohs options see page 77.
76 dimensions are in inches [millimeters]. all dimensions are subject to change. connector savers d - s ub positronic industries connectpositronic.com high density connector savers / gender changers contact variants face view of male or use mirror image for female male to female connector saver size 22 contacts a c e k1 k b d male contacts female contacts 0.290[7.37] 0.018[0.46] ?.008 0.036[0.91] 0.020[0.51] maximum rollover b1 d1 ?.005 0.120 [3.05] thru hole, 2 places molding spacer typical part number: dad15m0x15f0x d ad series size 22 cont a ct connect or sa ver 1 43 22 21 62 42 1 21 60 40 20 59 39 78 22 64 43 85 42 84 63 104 21 1 10 6 1 5 30 31 18 26 44 10 1 9 15 1 16 11 15 19 dad 15 dad 26 dad 44 dad 104 dad 78 dad 62 connector variant sizes a 0.015 [0.38] b 0.005 [0.13] b1 0.005 [0.13] c 0.005 [0.13] d 0.005 [0.13] d1 0.005 [0.13] e 0.015 [0.38] k 0.005 [0.13] k1 0.005 [0.13] 15 m 1.213 [30.81] 0.666 [16.92] 0.984 [24.99] 0.329 [8.36] 0.494 [12.55] 0.233 [5.92] 15 f 15 s 1.213 [30.81] 0.643 [16.33] 0.984 [24.99] 0.311 [7.90] 0.494 [12.55] 0.243 [6.17] 26 m 1.541 [39.14] 0.994 [25.25] 1.312 [33.32] 0.329 [8.36] 0.494 [12.55] 0.233 [5.92] 26 f 26 s 1.541 [39.14] 0.971 [24.66] 1.312 [33.32] 0.311 [7.90] 0.494 [12.55] 0.243 [6.17] 44 m 2.088 [53.04] 1.534 [38.96] 1.852 [47.04] 0.329 [8.36] 0.494 [12.55] 0.230 [5.84] 44 f 44 s 2.088 [53.04] 1.511 [38.38] 1.852 [47.04] 0.311 [7.90] 0.494 [12.55] 0.243 [6.17] 62 m 2.729 [69.32] 2.182 [55.42] 2.500 [63.50] 0.329 [8.36] 0.494 [12.55] 0.230 [5.84] 62 f 62 s 2.729 [69.32] 2.159 [54.84] 2.500 [63.50] 0.311 [7.90] 0.494 [12.55] 0.243 [6.17] 78 m 2.635 [66.93] 2.079 [52.81] 2.406 [61.11] 0.441 [11.20] 0.605 [15.37] 0.230 [5.84] 78 f 78 s 2.635 [66.93] 2.064 [52.43] 2.406 [61.11] 0.423 [10.74] 0.605 [15.37] 0.243 [6.17] 104 m 2.729 [69.32] 2.212 [56.18] 2.500 [63.50] 0.503 [12.78] 0.668 [16.97] 0.230 [5.84] 104 f 104 s 2.729 [69.32] 2.189 [55.60] 2.500 [63.50] 0.485 [12.32] 0.668 [16.97] 0.243 [6.17]
77 dimensions are in inches [millimeters]. all dimensions are subject to change. connector savers d - s ub positronic industries connectpositronic.com high density connector savers / gender changers ordering information - code numbering system specify complete connector by selecting an option from step 1 through 9 step 3 - 1 st connector gender m - male 1 2 3 4 5 6 7 8 9 10 dad 15 m s x 15 f s x /aa 11 -14 step 11 - special options -14 - 0.000030 [0.76? gold over nickel. -15 - 0.000050 [1.27? gold over nickel. contact technical sales for special options **step 8 - 2 nd connector mating style 0 - swaged spacer 0.120 [3.05? mounting hole s - swaged spacer 4-40 unc-2b threads * 3 e - rotating male and female jac kscrews (select 0 in step 4) * 3 e6 - rotating male and female polarized jackscrew (select 0 in step 4) * 3 t - fixed male and female jackscrews (select 0 in step 4) * 3 t6 - fixed male and female polarized jackscrew (select 0 in step 4) * 4 step 6 - 2 nd connector variant 15, 26, 44, 62, 78, 104 step 5 - 1 st connector shell option 0 - zinc plated, with chromate seal. * 5 s - stainless steel, passivated. x - tin plated. z - tin plated and dimpled (male connectors only). * 2 step 4 - 1 st connector mating style 0 - swaged spacer 0.120 [3.05? mounting hole s - swaged spacer 4-40 unc-2b threads * 3 e - rotating male and female jac kscrews (select 0 in step 8) * 3 e6 - rotating male and female polarized jackscrew (select 0 in step 8) * 3 t - fixed male and female jackscrews (select 0 in step 8) * 3 t6 - fixed male and female polarized jackscrew (select 0 in step 8) step 2 - connector variant 15, 26, 44, 62, 78, 104 step example step 10 - environmental compliance options /aa - compliant per eu directive 2002/95/ec (rohs) p o s i t r o n i c i n d u s t r i e s ? p e r e u d i r e c t i v e 2 0 0 2 / 9 5 / e c ? rohs r o h s compliant step 9 - 2 nd connector shell option 0 - zinc plated, with chromate seal. * 5 s - stainless steel, passivated. x - tin plated. z - tin plated and dimpled (male connectors only). step 7 - 2 nd connector gender * 1 m - male f - female - professional level - open entry contacts s - female - industrial level - posiband closed entry contacts military plating options available. note: once you have made a connector selection, contact technical sales if you would like to receive a drawing in dxf, pdf format or a 3-dimensional iges, step, or solidworks file. sk drawing 3-dimensional model note: if compliance to environmental legislation is not required, this step will not be used. example: dad15msx15fsx * 1 male option available only on connector variant 78. * 2 connector mating style for both connectors must be the same if 0 or s is used. if e or e6 is used in either step 4 or 8 the other step must be 0. * 3 for hardware information, see page 73. * 3 connector variant for both connectors must be the same as in step 2. * 5 for stainless steel dimpled male versions contact technical sales. step 1 - basic series dad series
|
